Filament taulman 3D PA Cast Plate Black 1.75mm
CHF 109.95 incl. VAT
Country of origin:
Properties of Alloy 910 from the plastic family Nylon
Alloy 910 is a significant development from taulman3D. The goal was to provide a material with very high tensile and sufficient elongation to maintain a high degree of durability. Alloy 910, when 3D Printed, comes in at 8,100 PSI tensile and close to 12,000PSI when injection molded. It has become a trusted additive material for top aerospace and automotive companies globally.
With a combined tensile strength higher than the strongest co-polyesters, the durability of nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance and a 82C working range, you now have one solution easily printable at 250C-255C.
Printability
| Printing temperature mm/s | 250 - 255°C |
|---|---|
| Temperature Printbed | 30 - 65°C |
| Level of difficulty | difficult |
| Surface | Normal |
| Specific weight | 1.11g/cm3 |
| Heat resistance temperature | 82°C |
| Possible nozzles | brass, Coated, copper, hardened Steel, ruby |
| Adhesion types | BuildTak Nylon, Dimafix |
| Special properties | Chemical Resistance, Flame retardancy, Food safe, UV / Weather resistant |
| Further | Dry the spool before printing: 12 hours at 70°C or 4 hours at 100°C. |
Variants
| Item no. | M01180010.1-8 |
| Barcode | M01180010.1-8 |
| Manufacturer | taulman 3d |
| Diameter | 1.75mm |
| Plastic type | Alloy 910 |
| Color | Black |
| Special properties | Food safe, Flame retardancy, Chemical Resistance, UV / Weather resistant |
| Level of difficulty | difficult |
| Surface | Normal |
| Country of origin | America |
| Filament Packaging | Plastic Spool |
| Plastic family | Nylon |
