Filament Stainless Steel powder PLA 1.75mm
from CHF 19.45 incl. VAT
Country of origin:
Properties of PLA Stainless Steel from the plastic family PLA
Stainless Steel PLA is a dense material that prints as easily as standard PLA.
- This stainless steel filled PLA can be polished to look like polished metal! It is also 2X the Density of PLA for substantial feeling prints
- Material is matte Gray with a cast metal look before post-processing
- Processing is comparable to standard PLA. No heated bed required. The process may be less consistent on smaller nozzles (<. 4mm) and/or Bowden Type machines
In filament form, Stainless Steel PLA is slightly more brittle than standard PLA and requires extra care
when handling.
Printability
| Printing temperature mm/s | 190 - 200°C |
|---|---|
| Printing speed | 20 - 30 mm/s |
| Temperature Printbed | 40 - 60°C |
| Level of difficulty | medium |
| Surface | Normal |
| Specific weight | 2.3g/cm3 |
| Heat resistance temperature | 60°C |
| Possible nozzles | copper, hardened Steel, ruby |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
| Special properties | Metalliferous |
| Further | Hardened nozzle of at least 0.50mm diameter is recommended |
Variants
| Item no. | M01198011.050-1 |
| Barcode | M01198011.050-1 |
| Manufacturer | Proto Plant |
| Diameter | 1.75mm |
| Plastic type | PLA Stainless Steel |
| Color | Grey |
| Special properties | Metalliferous |
| Level of difficulty | medium |
| Surface | Normal |
| Country of origin | America |
| Filament Packaging | Carton Spool, Without Spool |
| Plastic family | PLA |
