Filament Matte Fiber HTPLA White 3mm
CHF 51.95 incl. VAT
Country of origin:
Properties of HTPLA Matte from the plastic family PLA
A great alternative to Carbon or Glass Fibers, Matte Fiber HTPLA uses plant fibers great looks in both artistic and technical parts with no special hardware required!
Resulting 3D-printed prototypes and end-use parts are characterized by
exceptional stability of form and potential use up to 155 C deg when heat treated.
How to anneal:
Tempering objects made with HTPLA is not difficult, but needs to be done properly for best results.
Scale Values (x/y-axis) 101.1%
Scale Values (z-axis) 99%
1. Preheat the oven to 95–110 degrees.
2. When the oven is preheated, place your printed object in the oven.
We recommend placing the object on a flat aluminum sheet or similar.
Set a 10-minute timer
Printability
| Printing temperature mm/s | 200 - 220°C |
|---|---|
| Printing speed | 25 - 45 mm/s |
| Temperature Printbed | 40 - 60°C |
| Level of difficulty | medium |
| Surface | Normal |
| Specific weight | 1.14g/cm3 |
| Heat resistance temperature | 140°C |
| Possible nozzles | brass, Coated, copper, hardened Steel, ruby, stainless steel |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
Variants
| Item no. | M01185004.05 |
| Barcode | M01185004.05 |
| Manufacturer | Proto Plant |
| Diameter | 2.85mm |
| Plastic type | HTPLA Matte |
| Color | White |
| Level of difficulty | medium |
| Surface | Normal |
| Country of origin | America |
| Filament Packaging | Carton Spool |
| Plastic family | PLA |
