Filament Magnetic Iron PLA powder 3mm
from CHF 19.45 incl. VAT
Country of origin:
Properties of HTPLA Iron from the plastic family PLA
Proto-pasta Rustable Magnetic Iron Metal PLA Composite is actually ferromagnetic. It responds to magnets and behaves similarly to pure iron! Encapsulated in plastic, the iron maintains a stable matte, cast metal finish as printed, but can be rusted when desired.
- Weighted feel with 1.5x the density of standard PLA Rustable to create modern artifacts in a few easy steps
- Attracts magnets (neodymium type recommended for strongest attraction)
- Induction at magnetic saturation, about 0.15 Tesla
- Relative (to air) Permeability - between 5 and 8 independent of frequency up to 1 MHz
- Permeability - between 62E-7 and 100E-7 H/m independent of frequency up to 1 MHz
- Magnetic Iron PLA is slightly more brittle than standard PLA and requires extra care when handling.
Printability
| Printing temperature mm/s | 190 - 200°C |
|---|---|
| Printing speed | 20 - 30 mm/s |
| Temperature Printbed | 40 - 60°C |
| Level of difficulty | medium |
| Surface | Normal |
| Specific weight | 1.85g/cm3 |
| Heat resistance temperature | 60°C |
| Possible nozzles | copper, hardened Steel, ruby |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
| Special properties | Metalliferous |
| Further | Hardened nozzle of at least 0.50mm diameter is recommended |
Variants
| Item no. | M01199011.050-2 |
| Barcode | M01199011.050-2 |
| Manufacturer | Proto Plant |
| Diameter | 2.85mm |
| Plastic type | HTPLA Iron |
| Color | Grey |
| Special properties | Metalliferous |
| Level of difficulty | medium |
| Surface | Normal |
| Country of origin | America |
| Filament Packaging | Carton Spool, Without Spool |
| Plastic family | PLA |
