Formfutura

Filament PLA Volcano - Black 3mm

CHF 45.95 incl. VAT

Country of origin:

750g CHF 45.95 Available immediately

Quantity (pcs):

Properties of PLA Volcano from the plastic family PLA

Volcano PLA is an industrial grade PLA which is engineered for professional applications that require high printing speeds and improved heat resistance and mechanical properties similar to ABS. Volcano PLA offers the same mechanical and thermal properties – after annealing – as most ABS filaments, but with the biodegradability and ease of printing of PLA. Volcano PLA combines a high heat resistance with high printing speeds and high-impact resistance into a PLA-based filament engineered for industrial applications.

 

How to anneal:

Annealing objects made with PLA-X3 is not difficult, but has to be done properly for the best results. We have done many tests and believe we’ve found the right settings to achieve success every time.

1. Pre-heat a convection oven at 110°C / 230°F (use a thermometer to calibrate the exact temperature)

2. When the oven is pre-heated, quickly put your printed object (tip; Keep the supports attached) in the oven and
start a timer. We recommend placing the object on a flat aluminum sheet or similar.
• For small objects with thin walls & medium infill, set a 20-minute timer
• For large objects with thick walls & medium infill, set a 60-minute timer

3. When the object is done annealing, do NOT remove the object, but instead just turn off the oven.
Now wait for the oven to cool down to room temperature. Please be patient as this can take a while.

4. Remove the object from the oven (remove the supports) and now you have a perfectly annealed PLA-Volcano print.

Printability

Printing temperature mm/s230 - 265°C
Printing speed40 - 120 mm/s
Temperature Printbed45 - 60°C
Level of difficultymedium
SurfaceMatt
Specific weight1.27g/cm3
Heat resistance temperature95°C
Possible nozzlesbrass, Coated, copper, hardened Steel, ruby, stainless steel
Adhesion types3DLac Adhesion spray, PrintaFix, Spring steel plate PEI

Variants

ArticleFilamentPackagingSpool diameterinner diameterSpool widthPrice
01127010.7500.75kgPlastic Spool20 cm5.4 cm7.2 cmCHF 45.95
Item no. M01127010.750
Barcode M01127010.750
Manufacturer Formfutura
Diameter 2.85mm
Plastic type PLA Volcano
Color Black
Level of difficulty medium
Surface Matt
Country of origin Netherlands, European Union
Filament Packaging Plastic Spool
Plastic family PLA

Zubehör

Customers who bought this product, also bought:

Filament PLA NX2 Black 1.75mm extrudr
Filament PLA NX2 Black 1.75mm
1000g CHF 28.45
2500g CHF 59.95
10000g CHF 231.95
Software: Rent-a-Shop.ch