Filament PET-G Turquoise 3mm
CHF 42.45 incl. VAT
Country of origin:
Properties of PETG from the plastic family PET
Polyethylene Terephthalate Glycol (PETG) is one of the world’s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications
where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.
Features PET-G:
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Recycleable
Printability
| Printing temperature mm/s | 210 - 230°C |
|---|---|
| Printing speed | 40 - 60 mm/s |
| Temperature Printbed | 60 - 70°C |
| Level of difficulty | easy |
| Surface | Normal |
| Specific weight | 1.29g/cm3 |
| Heat resistance temperature | 75°C |
| Possible nozzles | brass, Coated, copper, hardened Steel, ruby, stainless steel |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
| Special properties | Chemical Resistance, Flame retardancy |
Variants
| Item no. | M01149206.11-1 |
| Barcode | M01149206.11-1 |
| Manufacturer | extrudr |
| Diameter | 2.85mm |
| Plastic type | PETG |
| Color | Blue |
| Special properties | Food safe, Flame retardancy, Chemical Resistance |
| Level of difficulty | easy |
| Surface | Normal |
| Country of origin | European Union, Austria |
| Filament Packaging | Plastic Spool |
| Plastic family | PET |
