Filament XPETG Carbon Black 1.75mm
CHF 51.95 incl. VAT
Country of origin:
Properties of XPETG from the plastic family PET
Polyethylene Terephthalate Glycol (PETG) is one of the world’s most common
thermoplastic polymers. Extrudr XPET-G Matt was developed for a wide range
of applications where the main requirement is a good balance between mechanical
and optical material properties. The raw material is approved according
to the REACH- and RoHS-Standards.
Features XPET-G:
- Good mechanical properties
- High chemical resistance
- Low warping tendency
- Low shrinking
- Recyclable
Printability
| Printing temperature mm/s | 220 - 240°C |
|---|---|
| Printing speed | 40 - 60 mm/s |
| Temperature Printbed | 60 - 70°C |
| Level of difficulty | medium |
| Surface | Matt |
| Specific weight | 1.29g/cm3 |
| Heat resistance temperature | 75°C |
| Possible nozzles | hardened Steel, ruby |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
| Special properties | Chemical Resistance, fiber containing |
| Further | Hardened nozzle of at least 0.50mm diameter is recommended |
Variants
| Item no. | M01148210.08-2 |
| Barcode | M01148210.08-2 |
| Manufacturer | extrudr |
| Diameter | 1.75mm |
| Plastic type | XPETG |
| Color | Black |
| Special properties | fiber containing, Chemical Resistance |
| Level of difficulty | medium |
| Surface | Matt |
| Country of origin | European Union, Austria |
| Filament Packaging | Plastic Spool |
| Plastic family | PET |
