E3D Lite6 HotEnd Full Kit - 1.75mm Direct
E3D Lite6 HotEnd Full Kit - 1.75mm Direct
CHF 63.95 incl. VAT
Available immediately
From experience we know that many people are satisfied when you can print PLA, ABS. That is why E3D has designed lite6. The E3D-Lite6 is the little brother of the E3D-v6. A prerogative at an attractive price with many possibilities. For example, the interchangeable nozzles. As an official reseller of E3D, we have almost all spare parts in stock.
Difference between E3D-Lite6 and E3D-v6
| E3D-v6 | E3D-Lite6 | |
| Price | From 81.95 | From 45.90 CHF |
| Print Performance | ||
| Max Temperathur | to 400 degrees | Up to 245 degrees |
| Speed | 20-100mm / s | 20-50mm / s |
| Compatibility | ||
| 1.75mm filament | Yes | Yes |
| 3.00mm filament | Yes | No |
| Direct | Yes | Yes |
| Bowden | Yes | Yes |
| E3D Volcano | Yes | Yes |
| V6-Nozzles | Yes | Yes |
| 12v version | Yes | Yes |
| 24v version | Yes | Yes |
| Filament | ||
| ABS, PLA | Yes | Yes |
| Smart ABS | Yes | Yes |
| Nylon | Yes | No |
| Wood, Laybrick | Yes | No |
| Bendlay, Bendlay Flex | Yes | Yes |
| PVA | Yes | Yes |
| PC | Yes | No |
| HIPS | Yes | Yes |
| POM | Yes | Yes |
Benefits • Nozzle are exchangeable from 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.60mm 0.80mm
• Nozzle are the same as with E3D-v6
• E3D Vulcano can also be used with the E3D-Lite6. Nozzle Diameter of the E3D Volcano 0.60mm, 0.80mm, 1.00mm 1.20mm
• Significantly cheaper than an E3D-v6
• Easy assembly
Disadvantage
• Maximum temperature of 245 degrees
• Available for 1.75mm filament only
Metal Parts
1 x Stainless Heatsink (Contains brass embedded bowden coupling ring pre-fitted in top)
1 x Aluminium Heater Block
1 x Brass Nozzle (0.4mm)
Electronics
1 x 100K Semitec 104GT2 NTC thermistor
1 x 12v 30W Heater Cartridge
1 x 12v 30x30x10mm fan
4 x 0.75mm Ferrules - for Solder-Free Wire Joins (You should only need 2, the other 2 are spares)
Fixings
4 x Plastfast30 3.0mm x 16mm screws to attach the fan to the fan duct.
1 x M3x3 socket dome screw and M3 washer to clamp thermistor
1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge
1 x Fan Duct (Injection Moulded Red Transparent Polycarbonate)¿
1 x Small Black Plastic Collet (For securing PTFE tubing into embedded bowden coupling installed in heatsink)
| Item no. | 01900121.1 |
| Barcode | 01900121.1 |
| Manufacturer | E3D |
| Stock | 4 pcs |
| Diameter | 1.75mm |
| Nozzle diameter | 0.40mm |
| Material nozzles | Brass |
| Voltage | 12v |
| Country of origin | Great Britain |
