Filament HTPLA Mahogany Wood 1.75mm
Filament HTPLA Mahogany Wood 1.75mm
CHF 51.95 incl. VAT
Country of origin:
Properties of HTPLA Opaque from the plastic family PLA
HTPLA is not every day PLA, but offers the ease of PLA printing with exceptional quality, compatibility, reliability. Durability, performance and finish.
When you combine this with annealing the HTPLA, the material reaches an HDT of 140°C.
How to anneal:
Tempering objects made with HTPLA is not difficult, but needs to be done properly for best results.
Scale Values (x/y axis) 102.0%
Scale Values (z-axis) 99%
1. Preheat the oven to 95–110 degrees.
2. When the oven is preheated, place your printed object in the oven.
We recommend placing the object on a flat aluminum sheet or similar.
Set a 10-minute timer
Printability
| Printing temperature mm/s | 200 - 220°C |
|---|---|
| Printing speed | 25 - 45 mm/s |
| Temperature Printbed | 40 - 60°C |
| Level of difficulty | medium |
| Surface | Normal |
| Specific weight | 1.2g/cm3 |
| Heat resistance temperature | 140°C |
| Possible nozzles | brass |
| Adhesion types | 3DLac Adhesion spray, PrintaFix, Spring steel plate PEI |
| Special properties | Wood |
| Further | Nozzle of at least 0.50mm diameter is recommended |
Variants
| Item no. | M01184017.05-3 |
| Barcode | M01184017.05-3 |
| Manufacturer | Proto Plant |
| Diameter | 1.75mm |
| Plastic type | HTPLA Opaque |
| Color | Brown |
| Special properties | Wood |
| Level of difficulty | medium |
| Surface | Normal |
| Country of origin | America |
| Filament Packaging | Carton Spool |
| Plastic family | PLA |
