Brands

Manage your 3D printer easily without a PC / notebook. With this LCD controller is this no problem. Save the print job to an SD card and insert it in the display.

This LCD controller is fully compatible with Ramps1.4., 1.5, 1.6
It has a resolution of 128 x 64 pixels
With this LCD controller you can adjust how long the LED light should burn.
If you later change to a Rambo you only need a new adapter.

Package List:
1 x SmartController
2 x 30 cm cable
1 x-Ramps Adapter

Installing the driver / software
• Install the Arduino software on your computer. Here you can find the Arduino Software
• Then you have to download the latest version of U8glib. You can find them here
• Afterwards, go to the Arduino software and open Sketch / Library import / add Library.
Now select the location of the previously downloaded zip file
• Now you have to remove the two // in your Configuration.h file before #define
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
• Afterwards, continue the upload with the Arduino software
• Turn off the power to the 3D printer.
After switching on, the display now works and the device can be operated without a computer.